Fix Preparing Automatic Repair Loop On Windows 11: An automatic Repair is a tool in the Windows operating system that assists you in analyzing and resolving issues that prevent your system from properly booting up. The tool has been included in practically all Windows versions for users’ convenience should they desire to invoke it and resolve any unusual behavior themselves. The tool is activated automatically if your PC fails to start correctly three times in a row.
Several systems get stuck on the Automatic Repair screen, and instead of diagnosing the PC, users are left looking at a blank black screen with no way to break the loop. Fortunately, the problem is not caused by the underlying hardware and is a software-based issue that may be readily resolved using the solutions described in this guide.
However, there might be more than one cause for this issue, and you may need to attempt more than one fix to resolve it fully. Therefore, before delving into the ways provided in this guide to resolve the problem, you must first understand how to enter the Windows Recovery Environment (WinRE) since most of the solutions described in this guide will need you to do so.
How To Easily Enter Window Recovery Environment (WinRE)?
Initial, turn on your system, and then, at the first boot-up signal, press and hold the power button for at least 20 seconds to shut it down. If you are working with a desktop PC, you may also unplug it. Repeat the process three times more, and then allow your PC to boot up normally the fourth time. This launches the Windows Recovery Environment (WinRE).
Preparing Automatic Repair Loop On Windows 11 PC? How To Fix
Boot Device In Safe Mode
A corrupt/damaged third-party service or software interference are typical reasons your device is stuck in the Automatic Repair tool. As a result, booting into Safe Mode allows you to only boot with necessary Microsoft services and correctly assess if the problem is caused by third-party software/service.
1 – After loading the Windows Recovery Environment, you will see the ‘Choose an option’ screen. To continue, locate and click the ‘Troubleshoot’ title.
2 – Click the ‘Advanced choices’ title to continue from the’ Troubleshoot’ screen.
3 – Locate and click the ‘Startup Settings’ title on the ‘Advanced Options’ screen.
4 – On the next screen, click the ‘Restart’ button in the bottom right corner of the screen to boot your PC into Safe Mode.
Delete Corrupted/Damaged File
Often, Startup Repair cannot operate because a vital boot file has been destroyed or corrupted. As a result, in this case, removing the file is a definite way to resolve the Preparing Automatic Repair Loop On Windows 11 issue.
1 – Input the Windows Recovery Environment by following the methods outlined previously in this guide. Then, on the ‘Choose an option’ screen, click the ‘Troubleshoot’ title to proceed.
2 – Click the ‘Advanced options’ title from the’ Troubleshoot’ screen.
3 – On the ‘Troubleshoot’ screen, locate and click the ‘Command Prompt’ title to launch the Command Prompt.
4 – On the Command Prompt screen, copy+paste or type the command below and press Enter on your keyboard to execute it.
5 – Next, type or copy/paste the following command and press Enter to continue.
6 – Lastly, to delete the issue file, type or copy+paste the following command into your keyboard and hit Enter.
7 – When the file is successfully erased. Restart your PC by either closing the Command Prompt window or entering the command shown below into the window.
8 – After restarting your computer, check whether the problem remains.
Rebuild Boot Configuration Data And Run CHKDSK
Many people, according to the official forum chatters, were able to resolve this issue by rebuilding the BCD on their system. You should also execute the CHKDSK command to detect and fix faulty sectors on your hard disk.
1 – Launch the Windows Recovery Environment by following the instructions outlined in this guide. Then, click the ‘Troubleshoot’ option from the ‘Choose an option’ screen to continue.
2 – Locate and click the ‘Advanced options’ title on the ‘Troubleshoot’ screen.
3 – To continue, on the ‘Advanced options’ screen, click the ‘Command Prompt’ title.
4 – On the Command Prompt screen, type the commands below and execute them one at a time.
5 – Once you’ve successfully run all of the preceding commands, enter the following commands one at a time, one at a time, and execute them by hitting Enter on your keyboard after each command.
chkdsk /r c
chkdsk /r d
6 – Lastly, restart your PC and check to see whether the issue has been repaired.
Restore Device Using System Image Recovery
If you’ve been encountering this problem after installing third-party software or doing a large update, this is likely the source of the problem. As a result, you may regain access to your computer by restoring it to an earlier point in the device using System Image Recovery.
1 – Once in the Windows Recovery Environment, locate and click the ‘Troubleshoot’ option.
2 – Next, on the next screen, click the ‘Advanced option’ title to proceed.
3 – To continue, from the ‘Advanced options’ screen, click the ‘System Image Recovery’ title. Now, your machine will restart.
4 – After restarting your computer, the ‘System Image Recovery’ screen will show on your screen. Find your account name in the section and click it to proceed.
5 – On the next screen, input the account password you used to log in to your computer and then click the ‘Continue’ option to continue. Click the ‘Continue’ option if you don’t know your password.
6 – On the ‘Select a system image backup’ screen, click the radio button next to the ‘Use the latest available system image’ option, then click the ‘Next’ button to continue.
7 – If you’re restoring the system image to a different machine, you must format and partition the storage disk to match the format of the drives from which you are restoring the image. First, locate the ‘Format and repartition the disk’ section and click the ‘Exclude disks’ option to do so. If the option is greyed out, click the ‘Install drivers’ button on the window to install the drivers for the disks you’re restoring. To begin, click the ‘Next’ button once you have formatted the previous partitions or installed drivers for the disks you are restoring.
8 – On the next screen, click the ‘Finish’ button to start the backup restoration process.
9 – The restoration process on your machine will now begin; please be patient until the process is completed. When the restoration process is finished, a prompt will show on your screen requesting you to restart your PC. Click the ‘Restart’ option to restart your PC and check whether the issue persists.
Factory Reset PC
If nothing appears to be working, you may erase your PC and eliminate the problem from its source as a last option. Well, this will reinstall Windows on your system and delete all files, directories, and system settings, restoring the PC to its factory defaults.
1 – Select the ‘Troubleshoot’ option from the ‘Choose an option’ screen in recovery mode.
2 – Next, click the ‘Reset this PC’ option on the screen.
3 – On the next screen, you can leave your files alone and refresh the system apps and settings or uninstall your files and apps and revert to the default system settings. The ‘Keep my files’ option will restore all system settings and apps to their previous condition while preserving your files. And the ‘Wipe everything’ option would remove all of your personal files, apps, and system settings, restoring your machine to a like-new condition. Finally, click your selected machine method from the ‘Reset this PC’ screen. For example, in this case, we are choosing the ‘Remove everything’ option.
4 – After choosing one of the options on the preceding screen, you must select the media for reinstalling Windows on your machine. You may either pick ‘Cloud download’ to download new OS files from Microsoft servers or ‘Local reinstall’ to reinstall Windows on your machine using current files on your local storage. Then, click the desired option on the screen to select it. You may also browse with the arrow keys and select an option by pressing Enter on your keyboard. Here, we’ve chosen the ‘Cloud download’ option.
Note: None of the options on this screen need you to use external installation disks to reinstall Windows.
5 – On the next screen, select whether you want to remove your files solely from the Windows installer disk or all drives. To select it, click the ‘Only the drive where Windows is installed’ option on the screen. Otherwise, select ‘All drives’ to remove files from your drives.
6 – Click the ‘Just remove my files’ option to delete your files. Next, select the ‘Fully clean the driver’ option if you are giving your machine away and do not want your files retrieved. Here, we’ve chosen the ‘Just remove my files’ option.
7 – It may take a few minutes for your Windows machine to prepare everything; wait until the next screen arrives. Now, Windows will show the consequences of resetting based on your preferences. Read them and then click the ‘Reset’ button in the bottom right corner of the screen to start the process. When the process is finished, your PC will restart as a new machine, and you will no longer see the ‘Preparing Automatic Repair’ screen.
There you have it, folks. Hopefully, the solutions listed above will fix you in resolving the Preparing Automatic Repair loop on your Windows 11 PC.