Fix Windows 11 Installation Has Failed Problem: Windows 11 is the successor to the Windows 10 operating system, and it updates the whole interface design language while also delivering several under-the-hood innovations. As a result, everyone using Windows 10 has been anticipating the release of the newest version of the operating system since its introduction. Typically, Windows installation is a simple operation that seldom causes any issues. Despite this, many people have problems installing Windows 11 on their computers.
The issues might arise for a variety of causes. However, remember that Windows 11 has stricter system requirements than any prior edition of Windows. As a result, make certain your computer meets the minimum requirements by manually verifying the requirements or using Microsoft’s PC Health Check App.
Anytime you encounter an error, Windows normally presents you with an error code that may help you narrow down the problem and resolve it within minutes. It’s only sometimes the case that the system will give you an error code. After that, you are tackling and resolving the problem is pretty straightforward.
As previously said, there might be a variety of causes for the Windows 11 failed installation. As a result, you may need to attempt various remedies recommended in this guide to install Windows 11 on your computer successfully. However, before we begin, here is a list of typical error codes and what they imply to assist you in understanding the problem and finding a solution.
Windows 11 Installation Common Error Codes
If Windows 11 displays an error code on the installation failed screen, search for it in the list below to see what precisely is preventing the operating system from installing on your computer.
0xc1900223 – This error code is often seen following a Windows 11 upgrade from an earlier version of Windows. The error code indicates that there was a problem downloading and installing the update to your system. Windows will attempt again outside of your active hours, and no action is needed on your part for the time being.
0xC1900200 or 0x20008 or 0xC1900202 or 0x2008 – This error code indicates that your computer does not satisfy the minimal criteria for installing the Windows 11 operating system.
0xC1900208 or 0x4000C – If you see this error code, you have an incompatible app installed on your computer that prevents the upgrading process from finishing.
0xC1900107 – If this error code appears on your screen, a cleaning process of files from a previous failed installation attempt is in progress. Restart the system and run the setup again to install the OS successfully.
0x80073712 – This error code will only appear on your screen if a critical file required for the update and installation is damaged and must be restored. Continue reading this guide to discover how to recover corrupted files on your system.
0x800F0923 – If you see this error code, it might mean that the program or driver you have installed on your computer is incompatible with Windows 11.
0x800F0922 – This error code might mean one of two possibilities: your computer could not connect to the Windows Update servers. If you’re using a VPN, unplug from it and try again. Otherwise, it might indicate a lack of free space in the System Reserved partition, which is readily remedied with third-party apps.
Error: The Update Isn’t Applicable To Your Computer. – This message is displayed on your screen instead of an error code. This is because your PC needs to be updated to the most recent version of your current operating system to be upgraded to Windows 11. As a result, before starting, run the Windows update to make that all essential updates have been installed on your PC.
0x80070070 or 0x50011 or 0x80070070 or 0x50012 or 0x80070070 or 0x60000 – If any of the error codes displayed above appear on your screen when attempting to update your system, it signifies you do not have enough capacity on your secondary storage device to install Windows 11. As a result, free up storage by deleting certain files and attempting again.
0xC1900101 or 0xC30017 – If this error code appears on your screen when attempting to install Windows 11, it indicates that the issue was caused by either externally connected devices or a third-party antivirus/antispyware. Remove any externally connected devices and turn off any antivirus/antispyware software that is installed on your system.
0x8007042B or 0x4000D – This error code may appear when a Windows setup is suddenly ended due to another process interacting with it in the background. To fix the problem, go to the next section of this guide to learn how to perform a clean boot on your Windows PC.
Suppose you are not one of the lucky few with an error code to assist you in resolving the issue on your system. In that case, the methods listed below will help you rule out the majority of the possibilities preventing you from installing the newest version of Windows on your computer.
Windows 11 Installation Has Failed Problem? How To Fix
Enable TPM And Secure Boot From BIOS Setup
One of the extremely particular requirements in Windows 11 is that your device has TPM (Trusted Platform Module) and Secure Boot activated. So though you may have the hardware on your PC, you must also ensure that it is activated to install Windows 11.
1 – To proceed, go to the Start Menu and then click the ‘Settings’ tile located beneath the ‘Pinned apps’ section. Alternatively, put Settings into the menu to perform it. You may also simultaneously open the app by pressing the Windows+I keys on your keyboard.
2 – Now, in the Settings window, find and click the ‘Update & Security’ button to proceed.
3 – To continue, locate and click the ‘Recovery’ option on the window’s left sidebar.
4 – Locate the ‘Advanced Startup’ section on the right section of the window and click the ‘Restart Now’ option to begin. This will instantly restart your PC and load the WinRE (Windows Recovery Environment) on your device.
5 – Once your PC has restarted, locate and click the ‘Troubleshoot’ tile to proceed.
6 – On the next screen, use the Arrow keys to emphasize the options shown on the screen and select the ‘Enter BIOS Setup’ option. Then, on your keyboard, press Enter to load the BIOS setup for your device.
7 – To continue, once on the BIOS setup screen, locate and click the ‘Security’ tab from the left section of the screen. After that, from the right side of the screen, locate the ‘TPM’/’ Trust Platform Module’ option and toggle it to the ‘On’ setting. To continue, if there is a dropdown menu, click it and select the ‘Enable’ option.
8 – To continue, locate and click the ‘Boot Options’ button on the left section of the screen. Then, in the right section, find the ‘Secure Boot’ option and flip the switch next to it to the ‘On’ position. If there is a dropdown menu, click the ‘Enable’ option to proceed.
9 – Now, press the F10 key on your keyboard or click the ‘Save changes & Exit’ icon on your screen to apply the modifications and exit your computer’s boot menu. This will restart your computer once again.
Uninstall Graphics Drivers
Many customers claim that just deleting the graphics driver allowed them to install Windows 11 on their devices. The issue is that the driver is compatible with the OS or is interfering with it during installation. However, you can be reassured since this will not make your computer’s graphical capabilities. The driver will be installed as an update on your computer after Windows 11.
1 – To uninstall the graphics driver from your system, select the Windows+R keys on your keyboard simultaneously to bring up the Run command utility on your screen. Then, in the supplied area, enter devmgmt.msc and press Enter on your keyboard to open the Device Manager.
2 – Now, on the Device Manager screen, find and double-click on the ‘Display adapters’ section to expand it.
3 – Then right-click on one of the below options to reveal the context menu. Then, to continue, click the ‘Uninstall device’ option. This will open a new window on your screen.
4 – From the newly opened window, click the option next to ‘Attempt to remove the driver for this device’ and then click the ‘Uninstall’ button to delete the driver from your PC.
Once removed, reinstall Windows 11 on your computer to see whether the problem remains.
Bypass TPM And SecureBoot Check Using Registry Editor
If something appears to need to be fixed for you, or if you do not have the TPM and SecureBoot components installed, you may circumvent them with an easy registry hack.
1 – Press the Windows+R keys together on your keyboard to bring up the Run command utility. Next, in the text field, enter regedit and keyboard Enter to open the Registry Editor on your computer.
2 – A UAC (User Account Control) screen will show on your screen. Enter your credentials if you need to be signed in with an admin account. Otherwise, click the ‘Yes’ button to continue.
3 – In the Registry Editor, either go to the directory listed below or copy and paste the location below into the address bar at the top of the Registry Editor window and press Enter on your keyboard.
Computer\HKEY_LOCAL_MACHINE\SYSTEM\Setup 
4 – Right-click the ‘Setup’ key to reveal a context menu. Next, hover over the ‘New’ option to expand the section and click on the ‘Key’ option. Well, this will create a new sub-key to the ‘Setup’ key on the window’s left section.
5 – Rename the key to LabConfig and confirm by pressing Enter on your keyboard.
6 – Select the newly generated key and go to the window’s right side. Then, right-click on the space to bring up a context menu, and hover over the ‘New’ option to expand it. Then, to proceed, click to select the ‘DWORD (32-Bit) Value’ option.
7 – Give the newly formed DWORD file the name BypassTPMCheck. Now, in the same key, please create a new DWORD file and call it BypassSecureBootCheck.
8 – Double-click the DWORD file named ‘BypassTPMCheck’ to edit it. This will open a new window on your screen. Now, in the newly created window, write 1 in the textbox under the ‘Value Data’ field and click the ‘OK’ button to save the changes and close the window.
9 – Double-click the DWORD file named ‘BypassSecureBootCheck’ to edit it. Then, in the newly created window, write 1 in the text box just under the ‘Value Data’ field and click the ‘OK’ button to apply the changes and close the window.
After that, restart your computer from the Start Menu and run the Windows 11 setup again. This time it should be successful.
Perform Clean Boot
A clean boot enables you to disable all except the most important Microsoft services on your computer. In this manner, you can be certain that no third-party background service will make with the installation of the new operating system.
Note: A clean boot doesn’t erase any data from your system.
1 – Booting your computer in a clean boot state is simple. To begin, press the Windows+R keys on your keyboard simultaneously to bring up the Run command utility on your screen. Then, in the text box, write msconfig and press the Enter key on your keyboard. This will open a new window on your screen.
2 – Next, in the System Configuration window, make sure the ‘General’ option is chosen. Then, under ‘Selective startup,’ select the box next to ‘Load system services’ and uncheck all other options if necessary.
3 – Next, click the ‘Services’ tab from the window, and then click the checkbox next to the ‘Hide all Microsoft Services’ option in the bottom left corner of the window. Then, click the ‘Disable all’ option to disable all services except Microsoft.
4 – Click the ‘Apply’ button to save the changes and the ‘OK’ button to close the window.
After that, restart your computer from the Start Menu to load the system in the clean boot environment. After restarting your system, try performing the Windows 11 setup again.
Conclusion:
There you have it, guys! Hopefully, this guide resolves the failed problem with Windows 11 installation and allows you to begin enjoying the latest operating system.
